T-Shirt Forums banner

Problem with encoder strip

1326 Views 0 Replies 1 Participant Last post by  crazymike
Several days ago I replaced the encoder strip the print head
drive belt and ribbon cable from the head. Only the head
and encoder strip were bad the others are 5 years old
and were precautionary. Since then after only 10 prints
I have to clean the encoder strip because of the ink
buildup on the strip. There is as much buildup in 10
prints as there usually is for a days printing. Has anybody
else had this problem? It seems like there is static attracting
the ink spray too it.
Thanks for any help.

This never happened before when replacing
the encoder strip.
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.