T-Shirt Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
24 Posts
Discussion Starter · #1 ·
Hey guys, Just wanted to know if its Possible to flash cure Transfer sheets, as opposed to using a conveyor belt. Im pretty sure that its possible but will it Work, will I be able to get good results? or am i setting my self up for failure? Thanks :}
 

· Registered
Joined
·
537 Posts
did see that you were attempting to make them, sorry . its possible but make sure you shrink them first . I don't know how long thou. if you had a conveyer you would run them thru first too.biggest problem keepng them on the platen while printing them. why not just print the shirts.
 

· Registered
Joined
·
3,145 Posts
I think you're asking about plastisol transfers. Yes you can use a flash unit when you print the transfers. Monitor your temp with a laser thermometer to be sure you don't get them too hot. Follow the curing instructions from the manufacturer.

You will achieve the final cure when you press the transfer onto the shirt.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top