from this threadSo my rep at magic touch pulled out a geo knight that he had and practiced with the settings for me. Turns out the sweet spot for that heat press is 320 degrees 30 sec. 9psi. very slow peel after about 5-10 seconds.
Printing with Wow 7.8
Hi there,
so we have wow 7.8 and we are following the instructions but it will not peel at all at the recommended heat of 140 cel for 45 seconds
So we put it up to 210 for 50 seconds and it does peel but some bits do not come off
we have tried a multitide of options now
this is to transfer our print onto the T sheet before pressing onto the shirt.
TIA
so we have wow 7.8 and we are following the instructions but it will not peel at all at the recommended heat of 140 cel for 45 seconds
So we put it up to 210 for 50 seconds and it does peel but some bits do not come off
we have tried a multitide of options now
this is to transfer our print onto the T sheet before pressing onto the shirt.
TIA
1 - 9 of 9 Posts
straight from the magic touch's site,The WOW7.8 ONLY works with the OKI Data printers that print white.
do you have the right printer?
Hi Thanks, yes we have the right printer.
we have our demo sheets from the supplier that we are purchasing the printer from. It is the heat press that is not working how we want it to.
we have our demo sheets from the supplier that we are purchasing the printer from. It is the heat press that is not working how we want it to.
Did anyone figure this out? I am brand new here, and have the same issues. Transfer paper won't peel. Some does, some doesn't, sometimes its stuck so hard that it rips the paper trying to peel it.....
OKI C711WT
Combo heat press - MT told me to set at 330*, and press for 120 sec - better but not acceptable. I'm now 16 images deep (started printing 6 per page so it doesn't cost so much), tried every temp from 285* - 400*, 60 sec - 180 sec...... I've gotten 1 image that is mediocre...
The T One, flawless, works great. But the Wow 7.8...... very frustrated.
OKI C711WT
Combo heat press - MT told me to set at 330*, and press for 120 sec - better but not acceptable. I'm now 16 images deep (started printing 6 per page so it doesn't cost so much), tried every temp from 285* - 400*, 60 sec - 180 sec...... I've gotten 1 image that is mediocre...
The T One, flawless, works great. But the Wow 7.8...... very frustrated.
Try the Neenah Image Clip for Darks paper.
AL
AL
So you use the binder clips to hold the transfer sheet to your heat press mat so that it doesn’t lift during peeling? Is that correct?Try the Neenah Image Clip for Darks paper.
AL
Just wondering if you ever figured this out? I am having same issues.Did anyone figure this out? I am brand new here, and have the same issues. Transfer paper won't peel. Some does, some doesn't, sometimes its stuck so hard that it rips the paper trying to peel it.....
OKI C711WT
Combo heat press - MT told me to set at 330*, and press for 120 sec - better but not acceptable. I'm now 16 images deep (started printing 6 per page so it doesn't cost so much), tried every temp from 285* - 400*, 60 sec - 180 sec...... I've gotten 1 image that is mediocre...
The T One, flawless, works great. But the Wow 7.8...... very frustrated.
1 - 9 of 9 Posts
- This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
T-Shirt Forums
A forum community dedicated to T-shirt merchants, professionals and enthusiasts. Come join the discussion about graphics, commerce, dyes, prints, collections, guides, displays, styles, scales, equipment, accessories, reviews, classifieds, and more!
Full Forum Listing
Recommended Communities
