T-Shirt Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Is it totally horrible to try and print a layer of white, flash with a heat gun, then print a layer of bright pink using the SAME screen without washing it out? As in, two inks on the same color arm, one after another?

I don't mind if the ink becomes a little swirly or whatnot, just trying to find a way to put down an underbase without resetting the shirts and having to mess around with registration all the time; I only have a two-color press but have a design that didn't include an underbase.

Thanks!
 

· Registered
Joined
·
1,113 Posts
You could always print the pink or the other color, flash and then hit it again. It's not going to be as bright but it's better than having a light pink.

Another thing you could do is print the white the clean the screen out with screen cleaner then use your pink ink
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top