[bigslickhimself]

Hi everyone,

I am quasi-new to the SP community, and I am posting here for any tips or tricks to printing on a womans bikini...Any help would be greatly appreciated!! I just want to see if there is a special way to do it before I just try myself and probably ruin like 3 or 4 sets in figuring it out.

Thanks in Advance!
-Ryan

 

[Rico Menor]

WATCH THE HEAT!!! They burn real easy...
I print with the screen on them flat as possible. In my experience when i try off contact i get a lot more ink build up due to the seems of the bikini, what i also did was cut up an old mouse pad and used it to raise the bikini surface off the board. They are tricky so plan on messing up a few.
I am still in the testing process on a few different styles. I am trying to find the ones that I can print the easiest. Out of 8 styles i want to have at least 4.

 

[dollen]

If you have ever looked at the Under Armour like shirts.. the moisture wicking type you will notice that they use a special waterbased ink that will streach a bit more than the normal inks. I would just be sure to test that stretch.

Cam
Rj Dollen