T-Shirt Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
3,184 Posts
Have as tight a screen as possible. Execute proper print technique. On darks you can get away with a single pass with a proper stencil but you may want to print/flash/print. Read and follow the recommendations provided and have an accurate way to measure the ink temperature (not a temp gun). Polys cure at lower temp. Get a few extra jerseys to wash test if you're providing them.

If the customer is providing them and they're any color other than white, I suggest not taking the job until you're experienced with printing dark polyesters.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top