T-Shirt Forums banner

1 - 9 of 9 Posts

·
Registered
Joined
·
9 Posts
Discussion Starter #1
Hi, just wondering what ink is the best to use for printing non woven tote bags,
Mesh size, Curing temp etc.
Any ideas??

Thanx
 

·
Registered
Joined
·
9 Posts
Discussion Starter #3
Yes sort of, we are screen printing water based Poloy Prop ink direct to bag and sending through a tunnel dryer at very low speed and low heat, very touchy if heat too high, bags will melt but having good succes once working.
Tony.
 

·
Registered
Joined
·
18 Posts
Hi,

Great, i seem to have some difficulty in doing that.
would u be kind enough to enlighten me with the steps u have undertaken.

and also machines/inks used...

what should be the proper procedue.?

rdgs,
mel
 

·
Registered
Joined
·
9 Posts
Discussion Starter #5
i am using Aquatex poly prop ink (from Jones Brothers print technolgy- Melb)
Printing with a 43T or 55T mesh direct to bag,
then run through a tunnel dryer at a very low heat (you will have to experiment with this) and Low speed (also experiment).
We are having success with this at the moment and seems to hold well.

good Luck
 
1 - 9 of 9 Posts
Top