[shacadia]

Hello all im new here my names sheree,
i have just added a visi-sub ciss to a epson b40w and all looked good recognised all the cartridges. but just wont print at all. ive reset and done every thing i can think of any ideas would be great...

Please help

 

[freshlysqueezed]

Is The ink flowing through the tubes? or are the ends of the carts clogged...

Is it moving like it would when printing just no ink?

 

[shacadia]

yes its moving like it is printing but nothing there.
the ink is moving through the tubes as i had some air bubbles but they are gone now.
how do i check if they are clogged?
sorry really new to this.

 

[freshlysqueezed]

Well if you take the cartridges out of the cis... you should be able to like stick a needle or toothpick in the hole in the bottom

 

[shacadia]

Sorry do you mean take the carts out of the printer?

 

[freshlysqueezed]

Yes then take like a needle and put it in the hole on the cart and the printer...