T-Shirt Forums banner

Print white on poly

1325 Views 6 Replies 4 Participants Last post by  Outlier
I tried out the pre treatment for polyester that Anajet sells and didn't know white ink would go right through it. Is there a poly primer that will work with white Anajet ink?
1 - 7 of 7 Posts
Poly's are tricky, darks usually never work great
Yeah I wasn't sure if it's even worth it. The pre treatment was expensive and didn't work well at all.
The poly primer is for cmyk prints on light colored poly only.
try pretreat, invers of t-shirt, with pritreat and distilated water 50/50.
for this method you need duble white ink, but it will work 20 wash+
1 - 7 of 7 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.