T-Shirt Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
40 Posts
Discussion Starter · #1 ·
Ok, I printed yesterday with design using white, today I tried to print on black shirts and all white channels no show, pulled print head and all nozzles flowed perfectly. Put back together and tried to do nozzle check and I had nothing on test print from any color, did about 12 nozzle checks and nothing, not even a dribble. Took dampeners back off to check ribbons and all were seated, put back together and still nothing. Anyone have any ideas????? Help
 

·
Registered
Joined
·
104 Posts
I had white ink problems similar sounding to yours (but not quite as bad) after I replaced a printhead and damper unit so I knew they were OK. No amount of print head cleans would bring the white back to full life. I then replaced the capping station and all was back to normal.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top