T-Shirt Forums banner
1 - 5 of 5 Posts

· Registered
Joined
·
161 Posts
Discussion Starter · #1 ·
Hi everyone.
I am having an issue with my printer module. Its print head won't move all the way to the right into locking position so it can sit on the print head seat. If I try to pull ink through the tubes with a seringe then it won't work because there is no pressure. What might be causing this?
Thanks.
 

· Premium Member
Joined
·
614 Posts
Hi everyone.
I am having an issue with my printer module. Its print head won't move all the way to the right into locking position so it can sit on the print head seat. If I try to pull ink through the tubes with a seringe then it won't work because there is no pressure. What might be causing this?
Thanks.
Please call us first thing in the morning and we will track that down.
In the interim make sure your linear encoder strip and capping station is clean as this can cause the print head not to park correctly,
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top