T-Shirt Forums banner

Pressing oversized prints/cutouts

1174 Views 2 Replies 3 Participants Last post by  tiger24
Do you guys have any tips/tricks for pressing oversized designs?
I have a 16x16 press, and even the 16x20 isn't very big.
I do JetPro ink transfers and vinyl. I've done some vinyl for oversized textile banners 12"x40" and they turned out fine, haven't tried it on shirts though.
1 - 3 of 3 Posts
Please visit our website and check out the video on printing oversize designs.
  • Like
Reactions: 1
hi paul,

one thing i always do for my oversized designs is hitting the seams twice and with extra pressure.
i have done oversized designs that ran into the collar and even the side seams.

good luck!
  • Like
Reactions: 1
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top