[twosik93]

So I got a new transfer paper from pro world the clear soft paper. It had two white sides so I printed on one of them. I went to transfer and the paper gets pressed to the top plate! D:
After it cooled off I was able to pull the paper right off but it left an outline on the plate with a rough feel where the paper was at. What do I do?

 

[splathead]

Here are some suggestions: http://www.t-shirtforums.com/heat-press-heat-transfers/t196307.html

When you get everything off, invest in a teflon cover sheet and use it religiously on every pressing.

 

[binki]

Grafixgone will take it off. If you don't have that then ammonia.