T-Shirt Forums banner

Pls help

1215 Views 3 Replies 4 Participants Last post by  RobertTSS
Pls help , new to tshirt printing use neenah jetpro soft strech on heat press but how do u get rid of the plasticy stuff that sticks to fabric. I want just the ink that stays on fabric, am i doing it wrong or is it supposed to be like this?


See less See more
1 - 4 of 4 Posts
that is normal, it will virtually wash off after the first wash or two

you can cut by hand as close to your design as possible or contour cut with a cutter (must have optical eye) and weed
but with all that text you won't wan to contour cut that, just the larger negative spaces

if you want weedless prints for white/light tee's search in the laser section for imageclip,
paying close attention to what Lnfortun says
  • Like
Reactions: 3
buy a silhouette cameo and contour/kiss cut and weed
Wash it once and you won't even feel the original coatings that aren't printed on to which you're referring in your original question
  • Like
Reactions: 1
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.