T-Shirt Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
2,719 Posts
Discussion Starter · #1 ·
Hi All, I'm a new member.

I have been using a heat press for a couple of years. I mainly use Eco film, and have used some plastisol from Howard sportswear before. I have a larger order which involves a transfer with a pocket, the image is on the front of the pocket and on the shirt. These images must line up. With the eco I have a clear backing, but with transfers I can't see the existing transfer or the pocket edge.

So my question is, should I just start weeding the Eco, :( or try the transfers?

Thanks in advance.
 

·
Registered
Joined
·
2,719 Posts
Discussion Starter · #3 ·
Hi Robin,

Thanks for the reply.

Yes 2 transfers. With the eco I can press both at the same time. Just alot of weeding.

My dream was silk, but, No screeners will touch the job, because of the pocket.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top