T-Shirt Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
61 Posts
Discussion Starter · #1 ·
Hi all looking for some tips on making plastisol transfers for hats (havent had luck with them at all!)

The biggest problem, ive had is the transfer looks squashed on - im guessing too much pressure? But if i use less then it doesnt quite press the whole transfer and mainly misses the middle


What temp should transfers be cured at when making them..


Do i print flash print white ink transfers for dark hats?
 

· Registered
Joined
·
4,706 Posts
try a couple of folded socks on the bottom platen to even out the 'voids'

i find mine does not fit any cap i put on it and i always have to use the sock trick

for me i put one folded in half horizontally on the platen,
and then one folded in half placed vertically centered

caps seem to require more time/pressure
i also put parchment paper over top of the transfer before pressing
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top