I would say "Reasonably priced", but the word "reasonably" may give the impression that there is a bad reason for the low price.
One thing to keep in mind with the " Cheap, less expensive , competitive priced , economical priced " Heat presses is their weight. Some are very light weight and when trying to put a lot of pressure on them once you try to release that pressure you end up picking up the entire press...one trick is to clamp or bolt the press down to your table which will allow you to put more pressure as it won't life off table when you are trying to release the platen....but you will still have a low end press and the heat press is most often the weakest link in the whole process
