T-Shirt Forums banner

Pinter keep printing when it is done with a job

1081 Views 1 Reply 2 Participants Last post by  JeridHill
DTG HM1 Printer keeps printing when it is done with a job. i send the job and when its done printing the shirt it starts printing the same job towards the bottom of the shirt. it did this about three or four times. and continuing. if anyone knows what the problem is please respond. i cleaned the encoder strip and that wasn's the problem thanks.
1 - 2 of 2 Posts
Sounds like it's most likely in the RIP. I don't know what the settings, etc should be so maybe contact your rep and they can walk you through it.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.