T-Shirt Forums banner

Panther Dryer Not Heating Up

1196 Views 2 Replies 2 Participants Last post by  teesfreeze
Hi all,

Hoping someone can give me some advice on our tunnel dryer.

Have had a used Panther Dryer 700 for nearly a year now. Been working great after a few new parts added. Just recently the ceramic elements stopped heating up. The conveyor and extractor fan are both working fine.

Does anyone have any ideas where to start about trying to fix it? Any advice at all would be great.

Cheers.

/dave
1 - 3 of 3 Posts
You will need to ascertain who made it. If it is an original Panther then it will have a phone number on the plate beginning 01603. Contact Mr Palmer via T Shirt Dryers, Tunnel Dryers and Screen Printing Equipment, UK. He will be able to tell you what is likely to be wrong.
The company was owned by Wicked Printing Stuff for a few months a couple of years ago, so any other number contact them. Wicked Printing Stuff, your home for screen printing equipment and screen printing supplies online store of Screen Inks and Solvents Ltd SISS

The company is now back in Mr Palmers ownership.

There is not a massive amount to go wrong with the dryer. It could be something as simple as needing a new thermostat. Might even be a loose wire
  • Like
Reactions: 1
You will need to ascertain who made it. If it is an original Panther then it will have a phone number on the plate beginning 01603. Contact Mr Palmer via T Shirt Dryers, Tunnel Dryers and Screen Printing Equipment, UK. He will be able to tell you what is likely to be wrong.
The company was owned by Wicked Printing Stuff for a few months a couple of years ago, so any other number contact them. Wicked Printing Stuff, your home for screen printing equipment and screen printing supplies online store of Screen Inks and Solvents Ltd SISS

The company is now back in Mr Palmers ownership.

There is not a massive amount to go wrong with the dryer. It could be something as simple as needing a new thermostat. Might even be a loose wire
Cheers Pat, it is one of Charlie's (from 1998 according to the info under the control panel). I've been in touch with him before about spares so will ping him a message.
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top