T-Shirt Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hi All,

Hoping someone can help me. I just upgraded my old heat press to a TransPro Select Semi Auto. Could someone tell me what the P-1, P-2, P-3, P-5, and P-5 means? Every time I press OK to change the temp or time I am taken to these screens, not sure what they mean. I tried goggling as well as reading the instruction manual but nothing found there. Hoping to figure this thing out, I've been banging my head against the wall for 2 days and ruining a ton of my heat vinyl

Thanks in advance!
 

· Registered
Joined
·
15 Posts
I think those are paper sizes. So if you google 'p1 paper size' a chart should appear.


Size Width x Height (mm) Width x Height (in) Aspect Ratio ANSI
P1 560 x 860 mm 22.0 x 33.9 in 1:1.5357 D
P2 430 x 560 mm 16.9 x 22.0 in 1:1.3023 C
P3 280 x 430 mm 11.0 x 16.9 in 1:1.5357 B
P4 215 x 280 mm 8.5 x 11.0 in 1:1.3023 A
P5 140 x 210 mm 5.5 x 8.3 in 1:1.5 -
P6 105 x 140 mm 4.1 x 5.5 in 1:1.3333
 

· Registered
Joined
·
3 Posts
Discussion Starter · #3 ·
I think those are paper sizes. So if you google 'p1 paper size' a chart should appear.


Size Width x Height (mm) Width x Height (in) Aspect Ratio ANSI
P1 560 x 860 mm 22.0 x 33.9 in 1:1.5357 D
P2 430 x 560 mm 16.9 x 22.0 in 1:1.3023 C
P3 280 x 430 mm 11.0 x 16.9 in 1:1.5357 B
P4 215 x 280 mm 8.5 x 11.0 in 1:1.3023 A
P5 140 x 210 mm 5.5 x 8.3 in 1:1.5 -
P6 105 x 140 mm 4.1 x 5.5 in 1:1.3333
I'm not sure how that would relate to the heatpress :confused:
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top