T-Shirt Forums banner
1 - 2 of 2 Posts

· Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hi I new in this business. I have a Oki C5100 that I used for printing t shirt transfer. The transfer looked ok from the printing but when i used it to transfer onto a white 100% cotton t shirt, the part that is not printed is shown as a darker tone as compared to the white t shirt. As such, the t shirt look unprofessional with a darker tone printed from the blank part of the tranfer paper. One printing company advised me to use OKI C5600 instead and I would not have this problem. Can anyone verified this ?
 

· Registered
Joined
·
426 Posts
I use a 5800 and do not have that problem, I suggest as a test, you select your white areas and make them transparent, your printer will not print anything that is transparent. It would be a good test. I am not well versed on the various models of the Oki.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top