T-Shirt Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
126 Posts
Discussion Starter · #1 ·
I just cut some Spectra Cut Plus on my Roland Stika 15". It seemed to "crinkle up" quite a bit when cutting. There were 2 images ganged up side by side. The left image did just fine, and the right was messed up pretty bad.

Is there a reasoning for this? Could this be roller related? (One side not pulling same speed?). Do i need to change blades for different materials? I'm unsure of what I have in there right now.
 

·
Registered
Joined
·
6,008 Posts
I would check to make sure the pinch rollers are not sticking causing the vinyl to bind up a little. ... JB
 

·
Registered
Joined
·
126 Posts
Discussion Starter · #3 ·
I would check to make sure the pinch rollers are not sticking causing the vinyl to bind up a little. ... JB
It looks to be working "ok", but seems to be sticking quite a bit more than with regular cotton/poly vinyl. (Spectra and thermoflex). I also cut 5yr window vinyl on it without an issue.

It seems to be "bubbling" up a bit and looking a little wavy. I don't get it :confused:
 

·
Registered
Joined
·
6,008 Posts
Is the back of the vinyl edge sticky. I mean could it be sticking because of something on the vinyl . ..... JB
 
1 - 5 of 5 Posts
Top