T-Shirt Forums banner
1 - 4 of 4 Posts

· Registered
Joined
·
152 Posts
Discussion Starter · #1 ·
I have a Kiosk. I am not able to keep ink in any of the lines. I have changed the capping station two times and have raised the ink. I am getting some dripping out of the printhead but that could be due the ink being raised. I am thinking it is the printhead but dont want to change without some confirmation. The weird thing is when I pull the ink through with a syringe I get good nozzle checks but then cant keep it there. Please help.
 

· Registered
Joined
·
2,285 Posts
It won't hurt to clean the encoder strip but most likely the dropping is from the ink being raised too high.

But, you need to get a good flow in order to get a good print.also, when was the past time you changed your dampers.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top