T-Shirt Forums banner

Newman Locking strips

1085 Views 0 Replies 1 Participant Last post by  danlilsade
Standing next to the bench this morning with a Roller Frame lying on it. Next to the frame was stray heavy duty wire tie??? I inserted the end in the channel, it was a bolt of lightning from the sky, the clouds parted and sun came shining through. It fit like a glove. The one I have may be a bit loose for 305 and up mesh counts, but it looks to me like it would work okay for most open mesh counts.

This item may work :


if so, locking strips for these frames would come out to about $.03 for 36" (a penny per foot) and if this particular one doesn't work I would bet someone manufactures one that will do the job (at a fraction of price of rolls of locking strips).
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.