T-Shirt Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
0 Posts
Discussion Starter · #1 ·
Good morning all

we converted a new epson eco tank 2800 and Used hippoo sublimation ink for it. Everything is printing on a shade of pink and I’m not sure why. Seems like a setting needs to be adjusted and or changed. Please help..has this happened to you before?

even the new test page was pink. When I try to switch to black k don’t get anything.
Thanks
 

·
Registered
Joined
·
1,604 Posts
What does a Nozzle Check look like? Are any colours missing? If you have just changed to sublimation inks it sometimes takes a while for the inks to reach the printhead. Try printing a full-page muticoloured image or colour chart a few times to get the inks moving and see if that improves things. If it does improve then install the ICC as @into the T has suggested above to ensure you get correct colour management.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top