T-Shirt Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
17 Posts
I have no experience with the press you are looking at, but I can't imagine a home built, wooden press would work very well...but I could be totally wrong. I have a Hix Hobby Lite press, and for low volumes, and print sized no larger than 8x11, it works quite well. You could probably pick one up on eBay for les than $300.

As far as your printer goes, your HP will not give you good results. HP, and most other printers on the market use dye based inks. If you print your shirt with dye based inks, your shirts WILL bleed and fade considerably after a washing. The printer of choice for t-shirts is an Epson, they use pigment inks that will not bleed when washed. The C series Stylus printers from Epson is a good place to start on a low budget. I just picked up a spare C66 on eBay for around $45 shipped, and it does a fine job.

Good luck!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top