T-Shirt Forums banner
1 - 6 of 6 Posts

· Registered
Joined
·
391 Posts
Discussion Starter · #1 ·
Ok, I've been trying to do a color sep by using layers in corel x3. Attached is what I have done so far but the little white spot in the left hand corner of the banner is supposed to be red. How can I quick fix this without having to go back and redo everything?

BTW this is going to be a 2 color print with the black being black and the RED really being whiteunderbase. So it will print b&w. I'm just using red to see where the white should be.

Help PLEASE!!!!

Thanks!
Craig
 

Attachments

· Registered
Joined
·
391 Posts
Discussion Starter · #3 ·
THANK YOU!!!!!!!!

I will try and remember to what you said next time this happens. I was at a loss as to what to do.

Thanks again!
Craig
 

· Registered
Joined
·
350 Posts
I just actually looked at your file in wireframe view. Are you cutting this in vinyl? If so, one thing you need to make sure to do is the select the text, go to Arrange>shaping>weld to get rid of those overlaps.
 
1 - 6 of 6 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top