T-Shirt Forums banner

Naugahyde Material

1648 Views 1 Reply 2 Participants Last post by  lben
Wondering if there is transfer that will work on rather thin naugahyde type material. We did a test with JPPS transfer, but the material pretty much melted under the pressure and heat. Tried different heats and press times. Even though the 'melting' wasn't quite as bad, the image does not transfer.
Any ideas or suggestions would be helpful

1 - 2 of 2 Posts
Have you tried vinyl? Some of them can be used under really low heat.
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.