So, can't take long to post this, but thought a few people would enjoy it. I picked up an old Hix N-800 automatic press, but one thing that drove me crazy was the 0-4min analog dial timer. I only use like 12% of the dang thing. And the worst past is that to do few second pre press, you have to turn the dial to 0 and then back to the desired time in order to unlock the press. So, I went to ACE Hardware, got some wire from my shop, and made a kill switch. I made the wires long for now and just taped the button on until I was certain that I like the location. Under a $10 project. Enjoy!
![]()
![]()
![]()
