[Florimonte]

Hi ALL,
Having a great time using our Re-Ferbed T-Jet2. Everything The stuff I've learned here has made the getting started part so easy. THANKS everyone.

White Ink coverage question: I'm using FastArtist 1.5 Ver 7.1 Rev 1 with FastRip 9 Ver 2.45.0
For the look I'm trying to get, I need to do two passes of white (using the heavy setting in the undercoat wizard) with the 1440 undercoat printing setting. One pass isn't solid enough and two is to much ink. I know I could use a med setting with two passes which would work, but is there a way to get more from the first pass. Just tring to speed things up alittle. Thanks again

Thomas

 

[Sherri]

Hey try and use the Wizard. You can set up where you want more white ink and less.

Sherri

 

[Florimonte]

Thanks Sherri- I've got that setting set to heavy. I'm just wondering if there is something (a setting) on the RIP side that controls how much is being put down...

Thomas

 

[Sherri]

Yes there is a setting, I am going to the shop afterwhile I will look up what I have found that works best for me. Maybe it will work for you as well

Sherri

 

[Florimonte]

Ohhhhhhhhhhh...... Can't wait! More info MORE INFO

Thomas

 

[Florimonte]

Just checking to see if anyone had a answer for me. Thanks.

-T

 

[equipmentzone1]

Hi,
If you follow the instructions in our "Idiot's Guide" for printing on dark shirts you should be able to put down a generous amount of ink in 1 pass. Here's a link: EZ FastArtist / FastRIP Guide

Also make sure you're putting down the proper amount of pretreatment.

Good luck!

 

[Sherri]

I have found the Wizard to be the best way to do this. You really have to play with this to get it how you want it. First make sure your shirt is pre-treated even. Second click on the wizard (pointed hat on the left) On the first setting you can actually adjust how much ink you want to lay down, then hit next and just adjust. Good luck, white ink takes lots of pratice

Sherri