T-Shirt Forums banner
1 - 2 of 2 Posts

·
Registered
Joined
·
6 Posts
Discussion Starter · #1 ·
*it's just a 604, not a 604-d sorry!

I am trying to fix a clogged printer issue that I am currently having with my mimaki GP 604 dtg printer. When I do a test print I get nothing on my paper and I am not sure why? Are the print heads really that clogged?

I did have a clogged line heading to the waste toner, but I thought I unclogged that. Was it that I didn't put it back together or pinched something?

Any advice is helpful and greatly appreciated! Frustration is setting in
 

·
Registered
Joined
·
202 Posts
Hi,

Sorry for the delay in responding to your post.
There can be several reasons why you are getting no ink on your paper during a test print. It could be clogged damper, clogged print head, clogged waist ink lines, broken pump, etc.

In my experience, the ink lines from the pump can clog up not allowing any ink to pass then when you do a cleaning nothing happens.

Good luck!
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top