T-Shirt Forums banner

MESA Distributors Debuts New Summit Digital Printer

1046 Views 0 Replies 1 Participant Last post by  Deborah Sexton
The new Summit DTG printer offered by MESA Distributors uses 4880 piezo print head technology for perfect dot registration accuracy within 0.017mm. It offers reliability and peace of mind with an advanced closed-loop ink system that delivers superior ink flow, less banding, and requires less maintenance leaving more time for revenue-generating production. The advanced ink system prints on light and dark cotton garments, light polyester, and light nylon using the same inks.

The Summit prints high-resolution life-like photographs at 720 dpi to 2880 dpi with millions of colors and accurately reproduces detailed gradient designs beautifully without banding or stepping. An 8- by 10-inch image will print at 720 dpi in approximately 50 seconds, and the maximum print size is 16- by 20-inches. RIP software is included, allowing you to print directly from most graphic programs.

The Summit features a four-point platen lift system allowing the operator to set the appropriate height to match garment thickness for easier printing on thicker garments such as hoodies and sweatshirts. Garments are easy to load and unload with the tuck-lock platen system.

The Summit includes two four-in-one configurable platens so that while one garment is printing, a second garment can be prepared speeding up production. The 4-in-1 configures as (1) 16 by 20 inches (adult); (2) 9 by 16 inches (youth); (2) 7 by 20 inches (sleeve); or (4) 7 by 9 inches (child). Optional platens also are available.

For more information, go to SummitDTG Direct to Garment Printer, call MESA Distributors (800) 456-3727, or email: [email protected]mesadist.com.


See less See more
1 - 1 of 1 Posts
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.