T-Shirt Forums banner
1 - 5 of 5 Posts

·
Registered
Joined
·
409 Posts
Discussion Starter · #1 ·
I realize this is a bizarre question, but i've been thinking about this idea for some time...

Let's say i have a very large raster image, to be printed perhaps at 24x36", from a digital solvent printer onto vinyl.

i wonder if there's any way that i can set it up so that it looks like it had been printed with four color process, at a 20 or so halftone frequency.

the idea is to have a blown-out halftone looking image where you can easily see the cyan, magenta, yellow and black comprising the image with an elliptical dot pattern.

if this could be done in illustrator and be vectored somehow that would just blow me away.

any suggestions??

derek
 

·
Registered
Joined
·
409 Posts
Discussion Starter · #6 ·
Both Illustrator and Photoshop have a filter under pixelate called color halftone. this will make any color image look like a color halftone. The variables allow the selection of coarseness. fred
Thanks Fred, I had a feeling you might chime in... you often do when it comes to the world of CMYK...

the color halftone filter is something i've never understood how to control, but perhaps that's because i've never printed any results... they always look so mangled on screen; much like converting to bitmap in photoshop, or bringing a dcsII file into illustrator. i just never put my faith into what looks like such a limiting filter.

i was able to bring each color channel into illustrator as it's own bitmap, trace under the detailed illustration preset, and assign each "channel" its appropriate color and register to achieve mediocre results.

the problem is that i'm not sure how detailed of a trace i can get with halftone dots. my first trial was at 20 lpi.

tomorrow i'll try 40.

the idea is to get the dot pattern visible in the print, and also have the image visible, and on top of that be scalable. I plan on using this element in large scale to wrap my vehicle.

thank you guys all for your help. i will post my results as they come, and of course, any more reccommendations are warmly welcomed.

derek
 

·
Registered
Joined
·
409 Posts
Discussion Starter · #8 ·
Im not sure if this would help, but have you tried giving every channel different lpis?

haven't tried it yet, but the look of the image is definitely effected by the layering of the different "channels" in Illustrator. i've found on first trial that, from bottom to top layer, it looks best as y, m, c, then k.

i notice that adobe's "default angles" run between 52 and 60ish on lpi with to-the-tenth angle settings for what i assume to be a well-calculated mathematical answer to solving the moire pattern, but i have yet to apply this idea to a much lower, AI traceable lpi. so far i've used 20 lpi, with varying screen angles in testing.

I assume that someone with advanced mathematical knowledge, or another with a whole lot of trial and error time on his/her hands could find the "magic numbers" to meet this challenge, but unfortunately without the knowledge, time or patience, i am forced to find a quick solution.

hopefully a few controlled experiments with lpi, opacity and color percentages tomorrow will yield satisfactory results.

derek
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top