T-Shirt Forums banner

1 - 2 of 2 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
Hey yall

our I-image has started printing a little fuzzy, almost looks like the ink is bleeding a little on the emulsion.

it usually only does it bad Monday mornings after a weekend of non-use...

our morning nozzle checks are pretty flawless, quick head clean then perfect.

we’re using ULANO trifecta emulsion, and the T6 ink from m&r...

couple photos of the issue below....
272400
3824A454-A7CF-46C1-BA37-C22DFD3E79AA.jpeg
272401
8606AE3B-D210-4093-985E-4C64FD84DD49.jpeg
 

·
Registered
Joined
·
2,631 Posts
It think light may have exposed the surface of the emulsion a little bit and it does not absorb the ink as fast as it should.
Try printing on a sheet of sublimation paper instead. If the problem disappears then my suspicion is correct.
 
1 - 2 of 2 Posts
Top