T-Shirt Forums banner
1 - 20 of 24 Posts

·
Registered
Joined
·
45 Posts
Discussion Starter · #1 ·
Hey everyone, I've finished my DTG build for the epson 1400, but im having software problems with acrorip 8.

I cant do single-pass printing with it, and thats something i really need. Does anyone have a copy of acrorip 9.0.3?
 

·
Registered
Joined
·
45 Posts
Discussion Starter · #9 ·
How does set to default YKLcLmMC and ALL WHITE testing?
The YMLcLmMC Test appears to work as usual. I dont see white being printed probably because its mislabeled using this setting and is thus blended with other colors when the print occurs.

The ALL WHITE setting Yields a result:
a white layer is printed. Its not Solid White though, (setting at 100%).
I tried using 200% which made it look brighter but still not preferred. So i tried using 500%, which then made the print job freeze while printing (or so i think this was the cause) 500% did print a little bit, and that little bit was brighter than the previous settings.

It will still send the print to the queue only to disappear, occasionally. At least with the ALL WHITE setting it worked. I still cannot get the COLOR+WHITE setting in the YMWWMC to work at all.

So i believe that the specific problem (correct me if im wrong, please) is that the prints are occasionally or frequently being sent to the queue only to disappear immediately, or to spool, then disappear. Sometimes the page count and the file size will not be visible (N/A) and that may have something to do with it.


I know this is a mess of information but its all i could gather. I appreciate the help, please continue.
 

·
Registered
Joined
·
1 Posts
[QUOTE = "ikhadem, message: 4481009, membre: 917797"]
Essayez de supprimer le pilote d'imprimante et de l'installer à nouveau, btw j'ai le accro rip 9 si vous le souhaitez toujours.
[/CITATION]

bonjour, je l'ai bien vu si tu l'as encore. Merci

hello, I saw it well if you still have it. thank you
 
1 - 20 of 24 Posts
Top