T-Shirt Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
1 Posts
Discussion Starter · #1 ·
Hy..my name is Marius,i live in Romania..i buy from 2 days a new printer from ghost withe toner (is a canon
Color imageCLASS LBP622Cdw

I made all setings describle on ghost web site + youtube videos ..i put all toner in maximize set paper too type 1 (i test type 2) i have same problem for all setings..dpi is 1200
wen print ..first step print is ok and in finish do not print ok..both..color and with toner..i use A+B foil system
Temperature in room is 22C is ok..if is possible i need help.
I tray to contact seller Ghost company..4 email..3 phone..no answer from this..i am very disappoint !
I made a test too print too normal laser paper..all prints is ok with no problem ..i print a CMYK test...print is perfect on normal paper !

Thanks
 

Attachments

·
Registered
Joined
·
3,902 Posts
i'm no expert on laser papers, but that looks like a paper/foil problem and not a printer problem
this takes some time and practice to get all your settings right

what papers and heatpress are you using?
 

·
Registered
Joined
·
3,727 Posts
The film is curled and it's smearing the toner before it gets to the fuser unit.
Font Art Wood Poster Creative arts

You can verify his by using a longer film.
You can try extending the A4 film, or trim a piece of A3 film to 21cm width.
The easiest solution obviously would be not to print on the affected area.
 
1 - 3 of 3 Posts
Top