Joined
·
9 Posts
What that looks like to me is called DYE MIGRATION, does the white look good coming off the printer? Or are you seeing issue before pressing?
If it looks good off the printer , before pressing, then I suggest using a little more TPU powder and curing a little longer, especially when pressing onto garments that are not 100% cotton. Also, there is BLACK TPU powder now, it makes a huge difference when pressing onto dark garments, check it out below:
www.inkdropprinterservices.com
I also found a really good step by step article regarding how to change a printhead in an L1800:
www.inkdropprinterservices.com
Hope any that helps.
If it looks good off the printer , before pressing, then I suggest using a little more TPU powder and curing a little longer, especially when pressing onto garments that are not 100% cotton. Also, there is BLACK TPU powder now, it makes a huge difference when pressing onto dark garments, check it out below:
DTF TPU Powder | Inkdrop Printer Serv
DTF black TPU powder, DTF white TPU powder, affordable prices quality DTF TPU powder
www.inkdropprinterservices.com
I also found a really good step by step article regarding how to change a printhead in an L1800:
How To Change Printhead on a Epson L1800
1. Remove the Upper Housing / Printer Cover. 2. Release the Carriage Lock, and move the Carriage Unit to the center. 3. Release the dowel and two hooks of the Cable Holder, and remove the Cable 4. Using the special tool, disengage tab A of the Adapter Guide Holder on the right rear side of the...
www.inkdropprinterservices.com
Hope any that helps.
