[GOUSA]

ANyone have suggestions on keeping their print room clean of lint/dust. Speaking to Kornit techs they say the number issue is related to lint get into the machine.

Would love to hear suggestions outside of wiping them down with Swiffers. We also have an old air scrubber.

Feedback is appreciated

 

[APrintwerx]

From my past experiences, I found that the following helps a lot:

Depending on the machine you have, if you are running Storm printers, make sure you run them with the hood down.
If you have a fan in the room, try pointing it away from the printer
In the shop I was in a while back, they set it up where the inlet of the dryer was the only part in the room, and the rest of the dryer was outside of the room, so the exhaust and outlet blew outside from where the Kornit was.
Aside from these suggestions, the best thing to do, is have the Kornit in a separate room, as closed off from the rest of your production as possible. If this is not an option, the weekly maintenance routines usually help a lot as well.

 

[scotthydra]

What kind of issues are you having? I work in multiple Kornit facilities that have over 12 AV's and lint is all over the place. They still run over 18 hours a day without issues.