T-Shirt Forums banner
1 - 10 of 10 Posts

· Registered
Joined
·
13 Posts
managed to get it on intermittently. Reset the waste ink pad counter (although was no way near full). The microswitch in the capping station seems to be the culprit. Still not 100% confident in switching it off. At least it will get me though today.

Does anybody know where I can purchase a replacement mirco switch? Is it native to epson or generic will do? If I get a r1800 off ebay will it contain one?
 

· Registered
Joined
·
71 Posts
Error 000 is commonly not associated with the capping station microswitch.

The CR lock is only activated towards the end of startup. If you are getting no movement once you press power then i'd look towards the boss board FFC cable arrangement / ink assembly board.

If you still need a microswitch we supply them.

01623 863343
 
1 - 10 of 10 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top