[easyray29]

I'm using an Epson 610 Printer with Pigment inks, and JPSS paper, with a heat press from Sunie (heat press 4801 15 x 15) I have th temp at 380, time at 30 sec. I press the shirt for a few sec before putting on transfer. I apply transfer, After the 30 sec. I open the press and peel while hot. around th edges of the transfer it doesn't come off smooth and most of the time part of the transfer comes off at the top part too. On all i've done so far, you can see the entire outline transfer paper on the shirt, is that supposed to happen? I have tried low pressure and high pressure. DO I need more heat? Please help or I won't have a good shirt left in my house.

 

[ejfuentz]

When I use jpss I pull from the bottom corner and across, and I also trim around the image to get rid of excess paper that is not needed that helps in not leaving the image look so square, it works for me. Just mt 2 cents.

Sent from my SGH-T679 using T-Shirt Forums

 

[easyray29]

Has anyne used a cutter (cutting machine) on JPSS paper? I might be interested in buying a small one if that might help me out? Pulling the paper off the shirt isn't that easy for some reason.