T-Shirt Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
366 Posts
I have only 1 dedicated circuit in my shop and that is for the air conditioner. The heat presses, I have a 16x20 and a cap press, sit along the same wall on the same circuit. I have ran both at the same time on the same circuit but try not to very much 'cause it usually winds up throwing a breaker.

I did plug my flash dryer in on the same circuit while my 16x20 was on the other day and the breaker tripped. Just plugged it into another circuit and all was well.

What is really frustrating is when at a festival and you have 4 different vendors plugged into four different plugs on the same pole and having to watch all day 'cause someone overloads and throws the breaker! That wasn't a very good day!!!! But, life is interesting at times!!!!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top