T-Shirt Forums banner
1 - 1 of 1 Posts

·
Registered
Joined
·
1,691 Posts
I would not recommend the press you are looking at. The main issue among many is the heating element coils in the upper platen (the part that heats your transfers adhesive to the proper bonding temperature) is not evenly spaced and allows for cold spots. Basically this means your transfers will not hold up to washing or in some cases transfer at all. Save up for a lite press from a known manufacturer, Stahls or Hix. You can get a decent one for around $350-400.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top