T-Shirt Forums banner

1 - 3 of 3 Posts

·
Registered
Joined
·
195 Posts
Discussion Starter #1
Hi I have someone who wants these shirts screen printed.. Need help!

Alo Mens Interlock Pieced Tee
100% Polyester, Anti-Microbial
100% Polyester interlock, mesh under arms, contrast coverstitching, performance fabric draws moisture away, anti-microbial treatment prevents bacteria and keeps garment odor free.

I usually just do cotton or at the most 50/50. I have no idea
if this will work. Will the flash heat melt the poly before the
plastisol cures or scorch heavily...

Any advice on the proper way to accomplish this would be wonderful!

Thanks so much!:)
 

·
Registered
Joined
·
859 Posts
No pic?

If they are dark shirts, use a low bleed poly, union's 1070 is awesome. Cure at 300, be careful to not overheat to get dye migration and or melted shirts.
 

·
Registered
Joined
·
195 Posts
Discussion Starter #3
Yeah to make matters more complicated I'll say, it has to be white ink on black shirts. I will look in to the poly... Thanks Mac!
 
1 - 3 of 3 Posts
Top