T-Shirt Forums banner
1 - 20 of 48 Posts

· Registered
Joined
·
219 Posts
Discussion Starter · #5 ·
I haven't found anywhere online where they sell any ink cartridges for the anajet printer, or say that there ink is compatible with anajet. The only reason why I posted the original question in this post is that anajet cartridges are expensive. I also know that anajet made there cartridges sealed so that your ink won't dry up. But if you are printing everyday you still have to maintain the ink but gently shaking the cartridges in the anajet printer. And if I have to do that then I was hoping that I could just get a bulk ink system that would save me some money. My anajet prints great and would recomend it to everyone.
 

· Registered
Joined
·
4,624 Posts
Something to consider is using the refillable cartridges for cleaning fluid. The cost of the refillable cartridges and a liter of cleaning fluid is around the cost of 3 cleaning cartridges. This way you get all the benefits of still running a closed ink system and you can save some money when you clean out your ink lines (which is always a good thing to do every couple of weeks) or go away for several days.
 

· Registered
Joined
·
2,238 Posts
Dan,

Have you sold many if you don't mind me asking?
Also, have you done test by any chance to see what print quality is with them compared to Anajet bottled ones... Main thing is that sure catriage is great deal but than end up spending a few hundred for each ink color
 

· Banned
Joined
·
964 Posts
While it only cost $65.00 to fill these up (CMYK) (250ml) there is something to say about a large savings ;)
I and a lot of other users have used bulk type carts/systems since day one of ownership(Me for almost 3 years) while yes we have has some clogging (Just like everyone else) the savings far out weigh the cleaning cost :D
Now I am not trying to sell anything here I am just pointing out my side of my testing, heck even for just cleaning the ink system they are a great inexpensive reuable tool!
Dan
"HAPPY PRINTING"
 

· Registered
Joined
·
1,557 Posts
Hmm that pretty cheap ha
I didn't see on your site INK cost??
Can you PM me with more info please and if works out well
I shall praise you to all users
Hey Sean
You be the tester :( and let me know how it works out. It would be great to save some money.

Let us know when you try it out.
Thanks
 

· Registered
Joined
·
2,238 Posts
Wow is all I can say....

Okay soo.. for giggles I opened up an Anajet cart. to see what it looks like and (what) I pay so much money for and well... I wish I had camera but Ex is using it..

It is a lil. tin pouch that holds in with a plastic surrounding .... woohoo
Oh and Anajet don't even got a chip on cart. Ha so as soon as I run out of ink or get Low I am soooo buying that refill Ink thing from DTG Inks err..

It a tin plastic bag with whole in it and that called closed ink cart. system.. O give me a break
 

· Registered
Joined
·
36 Posts
I can tell you the bulk inks work good, the smart thing to do is switch them all out at once so you can get the air out of the lines at one time. Shake white ink at night and it will be ready to go in the morning for printing. Shaking it right before you print will fill the lines with very small bubbles that migrate to large bubbles over time.
The bulk carts. have high and low lines to keep the ink levels at, but you can go below them if you need to keep printing a few jobs. If you have any questions I can get the answers from the guy who has it on his machine.
 
1 - 20 of 48 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top