T-Shirt Forums banner
1 - 20 of 146 Posts

· Registered
Joined
·
19 Posts
Discussion Starter · #1 ·
Hello,

I am relatively new to t-shirt printing and uses heat press. What transfer papers of good quality and with reasonable price do you recommend and where can I get these? I am from Cavite by the way and traveling to shops in Manila to buy supplies is okay with me.

TIA!
Beneliz
 

· Registered
Joined
·
19 Posts
Discussion Starter · #4 ·
Up ko lang po ito baka po may makapag-share pa dyan ng information.

Went to divisoria and checked some supplies there. Yung napagtanungan for dark transfer paper ay mas mahal kesa doon sa kinukuhanan namin dito sa cavite.

Yung US dark transfer paper namin is P80 per sheet ang kuha namin while P50 naman yung china. Ganito po ba talaga price nito? By the way, nahirapan kami mag-print sa china dahil medyo makapal at nahirapan mag-feed ng tama sa printer kaya i'm looking for another alternative na mas mura sana sa US paper na worth P80.

Also, baka may alam kayo na nakukuhanan ng polyester shirts. Yung nakita namin sa divisoria e free size lang. mas maganda sana kung may mga sizes.

Thanks in advance po sa lahat ng mag-feedback.

Regards,
Beneliz
 

· Registered
Joined
·
1,237 Posts
since napunta ka sa divisoria malapit na dun ang odeon theater sa corner ng recto at avenida, madami dun stores ng printing materials sa 1st floor. one particular store is good image si jason ang me ari. mabait yun kausap. madami ka ring madidiscover na pwede sa business mo. binibili ko sa kanila is us paper na blue grid. P55 ang bigay nila pero matatawaran mo ng 50 lang ang isa. yun na din ginagamit ko sa light and colored.meron din sa divisoria mall sa third floor hooked on line ang name pero sa phone lang ako naginquire. sarado kasi sila pala ng sunday nung puntahan ko
 

· Registered
Joined
·
1,812 Posts
Sir sa ibang thread nabangit na yung tungkol dito sa tanong nyo, pero try ko narin e share
sa Inkjet: (light garment) tansjet II, JPSS(jetpro), joto light
(dark garment) blue grid, joto dark, jetwear dark
sa laser: light garment( multitouch paper and joto paper)

Kung medyo mag experiemnt palang kayo try nyo mag experiment sa US paper then saka kayo mag experiemnt sa china...Unang una sa kaya US dahil pag umpisa or pag ransfer ng transfer sa damit karamihan naman maganda result niya pero after wash saka nyo lang makikita yung tunay na pagkakaiba...karamihan sa china nag crack kaya mahirapan kayo ebenta sa market hnd naman lahat ng china paper may ilan ilan din na maganda kaya depende narin sa customer/buyer nyo. Try nyo basahin yung ibang pinoy thread marami pang mga expereince and commnet dito( punta lang kayo sa search bar sa left side ng screen at type nyo PHILIPPINES) keep on reading...goodluck
 

· Registered
Joined
·
1,237 Posts
sa tee-studio available din us paper kina sir roq, mabait din kausap sila patrick, dun ako bumibili dati kaya lng medyo nalalayuan ako until madiscover ko odeon theater.

sir roq sa inyo ako bumili ng heat press ko ok nman kaya lang yung timer po ay di na gumagana so sa relo na lang tumitingin
 

· Registered
Joined
·
1,237 Posts
sir roq pasensya if baka mamisinterpret yung sabi ko above na di na gumagana ang timer. di ko intention na sabihing madalin nasira..sulit na sulit nga gamit ko dun at lahat ng t-shirts namin dumadaan don sa press... gusto ko lang pong alamin if pano ku maiibalik yung timer kaya. from the province kasi ako kaya di ko madala sa tee studio
 

· Registered
Joined
·
19 Posts
Discussion Starter · #12 ·
sa tee-studio ko din binilli ang transfer paper na ginamit ko sa huling project ko. jet pro. okay naman ang result.

i used sublimation ink pala. pero sabi pwede din daw pigment. ginagamit ko yung pigment pag dark transfer pero pagdating sa light transfer e sublimation gamit ko.
 

· Registered
Joined
·
1,237 Posts
sa tee-studio ko din binilli ang transfer paper na ginamit ko sa huling project ko. jet pro. okay naman ang result.

i used sublimation ink pala. pero sabi pwede din daw pigment. ginagamit ko yung pigment pag dark transfer pero pagdating sa light transfer e sublimation gamit ko.

pwede rin lang pigment...try mo...pakisabi mo nga sakin kung alin ang mas ok sa 2 when compared.hindi ba darker ang print out ng sublimation sa light transfer?plan ko kasing bumili ng subli para sa mug press naman
 

· Registered
Joined
·
47 Posts
Newbie here...

I just want to ask about the pros and cons in using china and US transfer papers? And if using such, based on your experiences, what would be the best settings for the heat press machine(temp and time)? What would you recommend?

The shirt stores in the mall, like Festival Mall in Alabang, there is one shop that offers heat transfer printing. If somebody happens to see it, are they using china or US transfer papers? (Nakita ko lang na yung for light nila ay walang nakalagay dun na print sa likod nung paper)

Thanks in advance!
 

· Registered
Joined
·
1,812 Posts
sa tee-studio ko din binilli ang transfer paper na ginamit ko sa huling project ko. jet pro. okay naman ang result.

i used sublimation ink pala. pero sabi pwede din daw pigment. ginagamit ko yung pigment pag dark transfer pero pagdating sa light transfer e sublimation gamit ko.
Pwede rin sublimationink kahit na sa anong brand ng transfer paper for light, ang deperencya lang kung artwork mo ay photo hnd maganda gamitin ang subli ink..mas maganda parin pigment ink.
 

· Registered
Joined
·
1,237 Posts
Newbie here...

I just want to ask about the pros and cons in using china and US transfer papers? And if using such, based on your experiences, what would be the best settings for the heat press machine(temp and time)? What would you recommend?

The shirt stores in the mall, like Festival Mall in Alabang, there is one shop that offers heat transfer printing. If somebody happens to see it, are they using china or US transfer papers? (Nakita ko lang na yung for light nila ay walang nakalagay dun na print sa likod nung paper)

Thanks in advance!
quality po...for me china paper can crack easily after few washes than the us paper that i used. right now di naman na nagkakalayo ang presyo nila mura na din us paper na gamit ko so mag us ka na...176 degrees sa 10 seconds ang setting ko...but let us wait for the reply of sir roq and vc trading they are the experts in this field
 

· Registered
Joined
·
47 Posts
quality po...for me china paper can crack easily after few washes than the us paper that i used. right now di naman na nagkakalayo ang presyo nila mura na din us paper na gamit ko so mag us ka na...176 degrees sa 10 seconds ang setting ko...but let us wait for the reply of sir roq and vc trading they are the experts in this field
Salamat padi18! I had a project last week and I was not able to test the quality of the china papers. Due to lack of time and resources, I was forced to use the china papers. I will take note of your recommendations and THANKS A LOT!

I hope that master roq and vc trading would enlighten us more with their expertise...

Salamat ng Madami
 

· Registered
Joined
·
35 Posts
sa mga expert sa transfer paper I need your advise, Im using jetpro transfer paper for light. Prints are great but they are cracking when I stretched the shirt. I tried diferrent temperature, pressure and time settings, hot peel and cold peel but I always come up with the same result. I'm using epson t10 with pigment ink. what seems to be the problem?





 

· Registered
Joined
·
1,812 Posts
Ano ba shirt gamit mo, 100% cotton ba yan, parang normal naman yung picture. mag crack talaga yan kapag binabanat mo ng maigi pero kung nag flakes yun yung masama...try mo change setting ng printer to best photo...then try mo e repress ulit pag katapos mo ma peel yung backing and stretch...JPSS ay 30sec hot peel repress for 5-10 sec with teflon then stretch sa transjet II 15sec lang and stretch.
 
1 - 20 of 146 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top