[jonmig]

Hi guys, After checking all the bottles and pipes I can't seen to stop the ink pressure alarm on the M2, has anyone else experienced this problem ?

Cheers

Sent from my SM-G925F using Tapatalk

 

[uktech]

Hi guys, After checking all the bottles and pipes I can't seen to stop the ink pressure alarm on the M2, has anyone else experienced this problem ?

Cheers

Sent from my SM-G925F using Tapatalk

There's a valve with the DTG logo on that sometimes seals if it's cold and stops the air flow to the bottles. Blow through this to break the seal and it should be ok

Sent from my SM-N910F using Tapatalk

 

[jonmig]

There's a valve with the DTG logo on that sometimes seals if it's cold and stops the air flow to the bottles. Blow through this to break the seal and it should be ok

Sent from my SM-N910F using Tapatalk

Hi Thank you
I have tried that, I was wondering if the motor could be at fault as there is a big brown mark on the plastic casing could it possibly be not turning fast enough to create the pressure?

Sent from my SM-G925F using Tapatalk

 

[uktech]

Hi Thank you
I have tried that, I was wondering if the motor could be at fault as there is a big brown mark on the plastic casing could it possibly be not turning fast enough to create the pressure?

Sent from my SM-G925F using Tapatalk

It's possible. As I recall your machine is a good few years old now, but I've not seen many motor failures.

Sent from my SM-N910F using Tapatalk

 

[jonmig]

It's possible. As I recall your machine is a good few years old now, but I've not seen many motor failures.

Sent from my SM-N910F using Tapatalk

lol it's not that old like new still
Thanks for your help (w)
I think if it's a possibility I'll try a new motor from YES


Sent from my SM-G925F using Tapatalk