T-Shirt Forums banner

Ink keeps blotting on my tee

1615 Views 3 Replies 3 Participants Last post by  GraphicGuy
I have a design that is 13 x 10 burned onto my 110 mesh screen using the 500w halogen light and stand from Ryonet. Per the video that came with my kit, I exposed the image for 13 min and it washed out clean. The problem comes when printing. The ink keeps getting blotted around the edges and doesn't come through the screen. If I do manage to get it to pass way too much ink gets on the tee..

What am I doing wrong?
1 - 4 of 4 Posts
pics would help
Sorry, I already reclaimed the screen and tossed the practice prints
shift to a higher mesh screen. 155 or some areas have 156 mesh. This is what I use for average prints. I never go below this.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.