[nexus6]

I wanna thank you people for giving me the knowledge to attain my goal of purchasing a heat press. So I took your advice and decided to practice my skills on being patient and look in the advertisement's for an american name brand heat press. So after only 2 weeks I found a hix 15x15 for 160.00 and only been used a couple of times.

Now I have my eye on two Epson stylus 1280's with bulk systems for both for 80.00 buckaroos. One has been used greatly and still works and the other was never used and was for back up part's. I want to use one for sublimation and another for dye ink or pigment ink for 50/50 poly cotton blends with jpss. Do you think I should get these printers or just start out with one 1100 workforce and then get another 1100 later or any ideas of something different.

Thanks for your time,

~Tony

 

[lben]

The 1100 has been discontinued so if you want one you better look fast because they are getting harder and harder to locate. I have 2 of them. One for sublimation and one for regular printing. People have a lot of problems with the bulk systems clogging. What I have are refillable ink carts from cobraink.com and then I get the inks in bulk.

 

[nexus6]

The 1100 has been discontinued so if you want one you better look fast because they are getting harder and harder to locate. I have 2 of them. One for sublimation and one for regular printing. People have a lot of problems with the bulk systems clogging. What I have are refillable ink carts from cobraink.com and then I get the inks in bulk.

Thanks Loretta,

I guess the 1100 and the 1280 are not that much different.