T-Shirt Forums banner
1 - 4 of 4 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter · #1 ·
If you can please help me. I am looking to sell t-shirts, mouse pads mugs, ceramic tiles, all with my artwork on it. I currently have no set up at all if you can please tell me exactly what to get and where. printer, inks, supplies, heat presses...etc. I am really lost on what to get. It will really be appreciated if you can help me out....thank you , Maurice
 

·
Registered
Joined
·
14 Posts
Discussion Starter · #6 ·
cprvh said:
Maurice,

First off you will need an Epson printer that will print as wide a transfer as you may need. For tiles, mouse pads and mugs a letter/legal size printer will do. If you want transfers larger than legal size for shirts, you will need to move up to a 13" or 17" printer. You only really need a CMYK printer.

There are currently three choices of dye sublimation inks available...Sawgrass, Artanium, and TOG. I would suggest a bulk ink system or refillable cartridges. You will also need dye sublimation transfer paper for your substrates. Some are specifically for hard or soft goods, other work well for either.

There are many choices for heat presses. If you are planning on transfering to tiles and thicker substrates, I would suggest a swing away press rather than a clam shell. Small presses start around $300 and go up! Match your press and printer sizes accordingly.

There are many suppliers for sublimation blanks, just Google "sublimation blanks." There are many choices to consider.

You should also visit www.dyesub.org. There are lots of good articles and reading there.

Good luck in your venture!
do you need special software to print the art work? for all these items
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top