T-Shirt Forums banner
1 - 3 of 3 Posts

·
Registered
Joined
·
190 Posts
If your cutter has four pinch rollers then you can cut edge to edge. You will need to put the vinyl on the two inside pinch rollers that way the cutter thinks you have media the size of the 4 pinch rollers. Then you will need to do some mathematics two subtract the negative space between the 1st pinch roller and the 2nd pinch roller where your media starts (this is the tricky part).

If your cutter only has 2 or 3 pinch rollers then you are out of luck.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top